Western Water Products             Environmental Solutions

Land Fill

For details contact WWP or email us from our Literature Request Page 

Home Up Literature Search ContentsOzone Systems 

Western Water Products manufactures Ozonation Systems for use with any Wash Water Recovery System as non-chemical method for reducing or eliminating odor problems with rancid or stagnant water.  When used in a continuous flow process, they provide an effective and economical means of reducing odor without the use of costly or hazardous chemicals. 

Methods of Applying Ozonation Devices:

 Use of Ozonation Devices listed below can be applied in several ways: 

Direct Ozonated Air:  Utilizes positive dry air supply, usually from an air compressor.  Air is fed from the air compressor at the rate of 1-8 CFM (depends on Ononator size) at low pressure and brought into the bottom of the Ozonator.  As air flows through, Oxygen is changed to Ozone gas.  The ozone exits out of the top of the Ozone Tube Chamber and is connected by tubing and forced into a tank through an ozone diffusion device.   Ozone bubbles from the diffuser to the surface to do its work.  An air pressure regulator is required. 

Injected Ozonated Air:  A Mazzei Injector device is utilized in the systems water flow.  As water continuously passes by the “T” in the injector, it draws in ozone created inside the Ozonator and entrains the ozone into the water stream through tubing connected to the “T” on the injector.  Water with Ozone continues to a downstream tank and form rising to the surface to do its work.  An air pressure regulator is not required. 

Re-pressurized Water with Injected Ozonated Air:  Water us drawn out of a tank or pit by a pump and back to the same or another tank or pit using the same pump.  In this process the system uses the "Injected Ozonated Air" principals described above.  Ozone bubbles to the top to do its work.  An air pressure regulator is not required.  Re-pressurized Water with Injected Air systems are provided as a “stand-alone” system and are provided with: Painted Steel Housing, Pump, Ozonator, Control Panel, all Internal Plumbing and Wiring.

 

 

SPECIFICTIONS

MODEL

Standard Duty 0Z-015

Standard Duty 0Z-030

Heavy Duty OZ-060

Heavy Duty 0Z-120

OZONE PRODUCED

15 PPM

30 PPM

60 PPM

120PPM

PRESSURE RATING

5 PSI @ 1 SCFM

5 PSI @ 2 SCFM

5 PSI @ 4 SCFM

5 PSI @ 8 SCFM

UV CHAMBER ELECT REQUIREMENTS

.3 AMPC

.55 AMPC

1.38 AMPC

2.76 AMPC

TOTAL ELECT REQ.

.75 AMPS

1.5 AMPS

3.0 AMPS

6.0 AMPS

VOLTAGE

110 VAC, 60 HZ

110 VAC, 60 HZ

110 VAC

60 HZ

WEIGHT

6 LBS

10 LBS

22 LBS

32 LBS

MATERIAL

UV PROTECTED PVC & ALUMINUM

UV PROTECTED PVC & ALUMINUM

UV PROTECTED PVC & ALUMINUM

UV PROTECTED PVC & ALUMINUM

APPROX. SIZE/DIM.

3” DIA x 18” LONG

4” DIA x 24” LONG

6” DIA x 43” LONG

8.5” DIA x 43” LONG

FINISH

2 PART URETHANE

2 PART URETHANE

2 PART URETHANE

2 PART URETHANE

APPROX UV CHAMBER LIFE

10,000 HOURS

10,000 HOURS

10,000 HOURS

10,000 HOURS

OPERATING TEMPERATURE

0-120 DEGREES F

0-120 DEGREES F

0-120 DEGREES F

0-120 DEGREES F

OZONE PRODUCTION

0.6 GRAMS/HOUR

1.2 GRAMS/HOUR

7.0 GRAMS/HOUR

14.0 GRAMS/HOUR

 

 

Standard Duty Ozonator System

 

Heavy Duty Ozonator System

Information Request Form

Select the items that apply, and then let us know how to contact you.

Send product literature
I am interested in a quotation
Have a salesperson contact me

Name
Title
Company
Address
E-mail
Phone

 

For details contact WWP or email us from our Literature Request Page

Copyright © 2009 Western Water Products
Last modified: 04/21/09