Western Water Products             Environmental Solutions

Land Fill

For details contact WWP or email us from our Literature Request Page 

Home Up Literature Search ContentsAGC-BS-RPS 

Model AGC-BS-RPS 

* Small Foot Print Clarifier System and Reclaim Module*

An ECONOMICAL ABOVE GROUND CLARIFIER RECLAIM SYSTEM Designed to SIMPLIFY EQUIPMENT AND INSTALLATION COST

This system combines a Model AGC-BS-240 Above Ground Clarifier System with a highly efficient Model AGC-BS-RPS, 10 Micron Filtration and Repressurization Module to provide a cost efficient wash water recovery system for pressure washers and hose washes. 

The complete system is a made up of two small and compact modules that when combined together create a unique clarifier/reclaim system designed to save space and save installation time. 

The Clarifier Module (AGC-BS) is the first stage of the system and includes a minimum of (3) separate small foot-print flat bottom poly tanks mounted on a corrosion-resistant aluminum stand.  Each tank is plumbed to maximize the flow path and dwell time.  Each tank is plumbed on the bottom with either manual valves or optional automatic valves to enable purging sediment from the bottom of the tanks. 

As water flows through the tanks sediment will drop out and oil will tend to float on the surface where it can be skimmed off through oil skim valves or adsorbed into floating oil pillows.  The system is designed with oil coalescers provided in the first two stages to maximize oil/water separation which causes oil to float to the surface.  The cleanest water is the last tank will be used by the next stage of the filtration process to create re-usable wash water for both pressure washers and hose washes  Oil bleed valves are provided with each stage to allow removal of free floating oil which has worked its way to the top of each tank.

The Filtration and Repressurization Module (RPS Stand) is a completely separate unit.  Taking the "clarified" water from the last and cleanest tank of the Clarifier module the self priming pump on the RPS Stand pumps the water through a heavy duty 10 micron cyclone separator.  The sediment which is centrifugally  cleaned from the water exits the bottom of the cyclone and returns to the pit, and the cleaned water exits the top of the cyclone.  At this point the water flow is split in two directions.  The first direction returns about 1/2 of the water flow through a mazzei injector where Ozone is introduced and the water is returned to the first tank in the clarifier module.  The second direction runs the filtered water through a set of heavy polish duty filters where it is further filtered and out to the wash on demand.

AGC-BS Above Ground Clarifier With RPS-FLT Repressurization FiltrationWash Water Recovery System

Typical Waster Flow using an optional Hopper Bottom Pit and Pit Sludge Removal System

Featured Highlights:

Text Box: Multi Functional Operation Sewer Discharge or Wash Water Recovery System Frame – Heavy Duty, Long Life Corrosion Resistant – Square Aluminum Tubing Size – Modular Pieces with Small Foot Prints AGC-BS = 28” Deep x 60” Wide x 68” High RPS = 24” Deep x 48” Wide x 66” High System Tank Housing Material Rugged Corrosion Resistant Poly – ASTM Certified Materials Sump Pump 110 VAC, 15 Amp Electric – Float Activated Adjustable Legs Stainless Steel Ozonation System Constant Recirculation and Ozonation for Odor Control Tank Oil Skimmer’s Standard ½ Pipe Skimmer and Drain Valve in each Tank Oil Coalescing Yes.  Oil Coalescers are standard in tanks 1 & 2 Continuous GPM Rating 10 – 15  GPM Maximum Cyclone Separator 10 Micron Separator Polish Filters Cleanable CELLOFOAM, Cleanable 90 Sq Ft Pleated Cartridge Output Pressure RPS = 15 GPM @ 40 PSI Tank Sediment Drain Valves Manual Valves are Standard.  Automated Valves are Optional Oil Adsorption Optional Floating Oil Pillows are Available Sludge Collection Hopper Optional (Consult WWP for Details) Heavy Duty Discharge Filters Optional (Consult WWP for Details) Trench Drains Optional (Consult WWP for Details) Pit Options Hopper Bottom and Flat Bottom Pits Optional Pit Sludge Removal System Optional  

 

 

 

 

 

 

 

 

 

 

 

Clarifier Options: Also see: Accessories Page

  • Ozonation/Aeration for odor and bacteria control for one or more tanks
  • Auto Timed Sediment Dump Valves on each Cone Bottom Tank
  • Sludge Collection Hopper
  • Oil Collection Barrel
  • Pit Options
  • Recycling System Module

Information Request Form

Select the items that apply, and then let us know how to contact you.

Send product literature
I am interested in a quotation
Have a salesperson contact me

Name
Title
Company
Address
E-mail
Phone

 

For details contact WWP or email us from our Literature Request Page

Copyright © 2009 Western Water Products
Last modified: 04/21/09